Isebenzise i-excavator

 

 

Xa uthenga ukubanjwa okusetyenzisiweyo, kubalulekile ukuba unikele ingqalelo kwizinto ezininzi ukuqinisekisa ukuba ufumana umatshini osebenzayo nowuthenjisiweyo.

 

1. Chaza iimfuno zakho kunye nohlahlo-lwabiwo mali

 

• Cacisa iimfuno zakho: Ngaphambi kokuba uthenge, chaza ngokucacileyo iimfuno zakho zokusetyenziswa, kubandakanya nemodeli ye-ExCavavator, ukusebenza kunye nokusingqongileyo emsebenzini, ukukhetha owona matshini ulungileyo.
• Seta uhlahlo-lwabiwo mali: Ngokusekelwe kwiimfuno zakho kunye nemeko yemali, qalisa uhlahlo-lwabiwo mali olufanelekileyo lokuthenga izinto eziphantsi okanye eziphezulu.

 

2. Khetha ijelo lentengiso elinokuthengiswa

 

• Amaqonga anokuhlala: Ezi ndlela zihlala zinovavanyo olubanzi, ukuqinisekiswa komgangatho, kunye neenkqubo zenkonzo yasemva kwentengiso.
• Ukuhlolwa kwendawo: Ukuba kunokwenzeka, bahlole ngokwasemzimbeni i-excavatator yokuqonda eyona meko.

 

3. Jonga ngokufanelekileyo imeko yezixhobo

 

• Uvavanyo olubonakalayo: Qwalasela i-ExCavator engaphandle kweempawu zomonakalo, ukuSebenza, okanye amanqaku okulungisa.
• Uhlolo lwecandelo oluphambili: Uvavanyo lwentsebenzo yokusebenza: Yenza uvavanyo lwedrive ukuze uve amandla e-EmCavavator, ukuphatha, kunye nokumba amandla.
  • I-injini: Yaziwa ngokuba yi "Intliziyo" yomcebisi, jonga iingxolo, ukukhupha amandla, iimeko ezingapheliyo, kunye nayiphi na imiba efana neoyile evuthisayo.
  • Inkqubo ye-hydraulic: Vavanya impompo ye-hydraulic, "Intliziyo" yenkqubo ye-hydraulic, ngokuvuza, rack, kunye nokuqhuba uvavanyo lokugcina imeko yokusebenza.
  • I-tracks kunye ne-Priverake: Jonga i-Procket drive, i-idler sprocket, i-roller, i-adredy, kunye nomkhondo wokunxiba kakhulu.
  • I-BOOM kunye nengalo: Jonga ii-screcks, amanqaku eWeldling, okanye imiqondiso yokuqeqeshwa.
  • I-Swing motor: Vavanya umsebenzi we-swing amandla kwaye umamele ingxolo engaqhelekanga.
  • Inkqubo yombane: Qinisekisa ukusebenza kwezibane, isekethe, imeko yomoya, kunye nokufikelela kwinkqubo ukukhangela imeko yebhodi ephambili.

 

4. Qonda imbali yenkonzo yezixhobo

 

• Iiyure zokuSebenza: Funda iiyure zokusebenza kwi-ExCantavator, iMetriki ebalulekileyo yokuGqibela ukusetyenziswa kwayo, kodwa kulumkele idatha ekhutshiweyo.
• Iirekhodi zokugcina: ukuba kunokwenzeka, buza ngembali yesondlo soomatshini, kubandakanya nakuphi na ukusilela okukhulu okanye ukulungisa.

 

5. Qinisekisa ubunini kunye nephepha

 

• Ubungqina bobunini: Qinisekisa ukuba umthengisi unobukrelekrele kwezomthetho ukuba baphephe ukuthenga umatshini ngeengxabano zobunini.
• Gqibezela amaphepha: Qinisekisa ukuba zonke ii-invoice ezifanelekileyo zokuthenga, izatifikethi zokuvumelana, iilayisensi, kunye namanye amaphepha alandelwe.

 

6. Sayina ikhontrakthi esesikweni

 

• UMNQOPHISO: Bhalisa ikhontrakthi yokuthenga esemthethweni kunye nomthengisi, ichaza iinkcukacha zezixhobo, ixabiso, ixesha lokuhambisa, kunye ne-emva-echaza amanye amaqela noxanduva.
• Uxanduva lokwaphula umthetho: Bandakanya amalungiselelo oxanduva kwimeko yokwaphula isivumelwano ukukhusela umdla wakho.

 

7. Cinga ngenkonzo yentengiso emva kwentengiso

 

• UMGAQO-NKQUBO WENKONZO YENKONZO YAMALUNGISELELO: QAPHELA UMGAQO-NKQUBO WENKONZO YENKONZO YENKONZO KUNYE NEXESHA LOKUGQIBELA ukuze kuqinisekiswe ukugcinwa kunye nenkxaso ngexesha lokuthenga.

 

Ngokuthatha amanyathelo okhuseleko kwiimfuno zokuchaza kunye nohlahlo-lwabiwo mali lokutyikitya isivumelwano esisesikweni, kwaye ngokukhetha izixhobo zentengiso, qinisekisa ukuba inkonzo yayo yokuthengisa, unokuyiqonda kakuhle inkonzo yokuthenga, unokuqinisekisa ukuba ufumana umsebenzi osebenzayo nothembekileyo osetyenzisiweyo.